Will My Tripod Support a Crane? - 055xb tripod legs
I have a Manfrotto / Bogen 055XB tripod, which says it supports up to 15 pounds. The lift, I am looking for Camcrane Glidecam 200, which says it has a payload of up to 30 pounds. according to height. What happens if I use the crane with my tripod?
055xb Tripod Legs Will My Tripod Support A Crane?
2 comments:
Glidecam Crane 200 weighs 19 pounds.
http://www.glidecam.com/product-camcrane ...
The Bogen / Manfrotto 055XB tripod is estimated to account for about EUR 15.4. Only the crane weighs more than the tripod is set. Attach a camera and attached cables and counterweights, and for a catastrophic failure of the tripod.
Please let me know where I can capture video from the camera crashing to the ground.
Due to overloading of the stand, there is no guarantee at all. Yes, you could say.
++++++++++++
I had not provided an alternative ... Crane specifications also state, "Camcrane 200 is mounted on the bolt 3 / 8" standard in most medium and heavy tripod, and B / M, that the list is a consumer (company) stand.
The Kessler K-Pod "system tripod is a good idea. This is the crane.
ProAm (Bargain sold) by the Board has a turn-key set - apparently with a "medium" as used in SPEA PA tripod usedker DJ lights or trees. Guitar Center Musiciansfriend or possess. The key is under the mechanism.
Remember that you also have a monitor (I use a 8.5-inch Portable DVD Player with Sony AV output - which is a 5 hours battery life when playing DVDs - and only in the monitor mode). And is connected to a long RCA AV cable to the camera on the screen.
You also need a LANC. Since you do not tell us that you can use your camcorder, we do not know if you have LANC port ... and if so, an extension of the long shots.
And as an option you might want a motorized tilt / pan Device ... I found it to be cheap (~ $ 130) or very expensive ($ 1,200), but can not take much to choose from.
Glidecam Crane 200 weighs 19 pounds.
http://www.glidecam.com/product-camcrane ...
The Bogen / Manfrotto 055XB tripod is estimated to account for about EUR 15.4. Only the crane weighs more than the tripod is set. Attach a camera and attached cables and counterweights, and for a catastrophic failure of the tripod.
Please let me know where I can capture video from the camera crashing to the ground.
Due to overloading of the stand, there is no guarantee at all. Yes, you could say.
++++++++++++
I had not provided an alternative ... Crane specifications also state, "Camcrane 200 is mounted on the bolt 3 / 8" standard in most medium and heavy tripod, and B / M, that the list is a consumer (company) stand.
The Kessler K-Pod "system tripod is a good idea. This is the crane.
ProAm (Bargain sold) by the Board has a turn-key set - apparently with a "medium" as used in SPEA PA tripod usedker DJ lights or trees. Guitar Center Musiciansfriend or possess. The key is under the mechanism.
Remember that you also have a monitor (I use a 8.5-inch Portable DVD Player with Sony AV output - which is a 5 hours battery life when playing DVDs - and only in the monitor mode). And is connected to a long RCA AV cable to the camera on the screen.
You also need a LANC. Since you do not tell us that you can use your camcorder, we do not know if you have LANC port ... and if so, an extension of the long shots.
And as an option you might want a motorized tilt / pan Device ... I found it to be cheap (~ $ 130) or very expensive ($ 1,200), but can not take much to choose from.
Post a Comment